1.2363
X100CrMoV5-1 / AISI: A2
Delivery Method : Normalized, annealed 180-220HB
Uses : It can be hardened in the air, it is cold work tool steel with high abrasion resistance, hardness, toughness, ductility, machinability and compressive strength. It is a steel used in cutting molds up to 6 mm thick, in all cold forming molds such as paper and scissors blades.
*Time interval varying depending on the section.
Delivery Method : Normalized, annealed 180-220HB
Uses : It can be hardened in the air, it is cold work tool steel with high abrasion resistance, hardness, toughness, ductility, machinability and compressive strength. It is a steel used in cutting molds up to 6 mm thick, in all cold forming molds such as paper and scissors blades.
| Chemical Composition (%) | C | Si | Mn | Cr | Mo | V |
| % Average | 1,00 | 0,25 | 0,60 | 5,30 | 1,05 | 0,25 |
| DIN Analysis | 0,95-1,05 | 0,10-0,40 | 0,40-0,80 | 4,80-5,50 | 0,90-1,20 | 0,15-0,35 |
| Luminous Conductivity ( W/ m.K ) | 20°C | 350°C | 700°C |
| 15,8 | 26,7 | 29,1 |
| HEAT TREATMENT DATA | |||
| Temperature (°C) | Time (Hours) | Cooling Environment | |
| Softening Annealing | 800-840 | 2-5* | Bake |
| Tension | 600-650 | 2* | Bake |
| Hardening | 930-970 | - | Oil, hot bath 500 ° C, air |
| Tempering | 160-540 | 1 hour for every 20 mm | air |
*Time interval varying depending on the section.